• Alumni Community

  • Staff: Web Mail System

Faculty Of Natural Science

FORWARD TO THE THIRD EDITION

Enugu State University of Science and Technology (ESUT) came into being as a metamorphosed version of the defunct Anambra State University of , Science and Technology (ASUTECH) following the creation of Enugu State in 1991. The Faculty of Applied Natural Sciences (FANS) was one of the pioneer faculties. FANS has been the bedrock upon which the academic programmes of the various University Faculties are anchored. Without prejudice to the above, the faculty has been conducting first degree examinations for the award of bachelors’ Degree in seven departments since 1996.
In reaching out to applicants, the Faculty publishes vital information/guidelines in a brochure which has come To be popularly known as the “Faculty Handbook’ The handbook provides applicants with detailed information on Courses offered and the entry requirements into bachelor Degree Programmes for the departments in the Faculty. In addition; the handbook contains information on the philosophy and objectives of the Faculty and the individual department; regulations governing the conduct of examinations; examinations grading system: project reports and degree classifications and prospects for graduates of the Faculty.
This (third) edition, in consonance with the National Universities ‘Commission (NUC) Minimum Academic Standards, is a revised, up-to-date version of the preceding editions. However changes will continue to be made from time to time in future editions. It is hoped that maximum benefit will be derived from this new edition. Students, applicants and students’ academic advisers are therefore advised to study the Handbook thoroughly. They will be glad they did.

Prof. S.N. Amujiogu (Ph.D)
Dean, Faculty of Applied Natural Science
April 2008

OFFICE OF THE DEAN FACULTY OF APPLIED NATURAL SCIENCE

Senior Staff List
  QUALIFICATION POSITION
Amujiogu S.N. B. Sc (Germany) Professor and Dean
  M. Sc. (USA)  
  Ph. D. (USA)  
Okwor F.C. B. Sc (Rons) (UniPort) Snr. Assit. Registrar
  PGD (Nig (Faculty Officer)
Ekwueme, G.O. HND (FPI) Accountant II
  MBA (IMSU) (Finance Officer)
Ugwuoke D.O. B. Sc. (ABSU) Secretary
  RSA, NABTEB  

I. PHILOSOPHY AND OBJECTIVES OF THE FACULTY

The Faculty aims at producing scientific and technological manpower required to achieve the goals of Nigeria in general and those of Enugu State in particular. For this purpose emphasis in the students’ training is placed on the following objectives:

  • The inculcation of the fundamental principles of science (the scientific methods).
  • The development of capability for innovation and improvisation/using local resources, and
  • The application of the scientific method in technological development with a view to solving the problems of our society

Based on the above, it is hoped that the graduates produced will

  • Meet the needs of the State Government and the country for the teaching of all science subjects in the various institutions of learning;
  • Fit into positions in the Science and Research sectors of the various ministries and parastatals, and
  • Be able to set up small-scale industries and other commercial projects consequent on the practical and applied orientation of the training programmes undergone.

II. CONSTITUENT DEPARTMENTS OF THE FACULTY

The Faculty at present consists of the following departments:
  • Applied Biochemistry
  • Applied Biology & Biotechnology
  • Applied Microbiology and Brewing
  • Geology and Mining
  • Industrial Chemistry
  • Industrial Mathematics, Statistics and Demography
  • Industrial Physics

III. ADMISSIONS

Admission into the Faculty programme is through the national University Matriculation Examination (UME), Pre-Science (pre-degree) programme of ESUT and Direct Entry (DE) for holders of Advance Level, GCE and Diploma certificates.

The basic qualifications for admission of students through UME is O’level credits obtained in not more than Two sittings in at least FIVE subjects. In addition, individual departmental requirements must be satisfied as shown in Table I.

Requirements for admission into the various departments
S/No Department UME/Pre-science Direct Entry
    Requirements Requirements
1 Applied O’Level credits in A good OND with at
  Biochemistry English, Biology, least 2.5 CGPA; A-Level
    Chemistry and Physics passes in Chemistry,
    or Maths Biology and Maths of Physics
2 Applied Biology O’Level credits in A-Level passes in
    English, Biology or Biology, Chemistry or
    Agric Sc. Chemistry and Physics or Maths Maths; or its equivalent acceptable OND/HND
3 Applied O’Level credits in A-Level passes in
  Microbiology and Brewing English, Biology or Biology and Chem. or
    Health Sc./Agic Sc., Physics or Maths. Or its
    Chemistry and Maths or Physics equivalent acceptable OND/HND
4 Geology and Mining O-Level credits in English, Maths., A-Level passes in any two of Physics,
    Physics, Chemistry and Chemistry and Maths,
    any other Science subjects acceptable OND/HND
5 Industrial O-Level credits in English, A-Level passes in Chemistry, and Maths or
    Chemistry, Physics and Maths Physics or its equivalent; acceptable OND or HND
6 Industrial Maths, O-Level credits in English, A-Level passes in two subjects which must
  Statistics and Demography Maths or Statistics plus any two of Add Maths, Physics, Chemistry, Biology and Economics include Physics and Maths or Statistics or its equivalent, with a pass in Chemistry at O-Level; NCE or OND in related courses
7 Industrial Physics O-Level credits in English, Physics, Maths and at least a Pass level in Chemistry Biology or Agric, Sci. A-Level passes in Physics and Maths or Statistics, and pass level in Chemistry, or its equivalent. OND/ in Sci. Technology/Engineering

IV. GUIDELINES FOR STUDENTS UNDER THE COURSE CREDIT SYSTEM

  • For progress through the degree programmes under this system, students should note certain points. They are important enough to be introduced as background information at this point.
  • Every student is assigned an academic adviser who guides the student throughout his/her academic programme in the faculty.
  • A student admitted to the University for the first time to read for a degree will be required to matriculate and sign the matriculation register. This exercise is usually organized by the University.
  • Proper and timely registration is very important Under the Course Credit System. This is to because the programmes of student are individualized. Students who attempt examinations in courses for which they have not registered will receive no results.
  • REGISTRATION

Registration begins with payment of the stipulated fees and other charges to the University in designated banks. Receipts are issued by the University Bursar. Thereafter, registration forms are collected from the faculty office upon presentation of the official receipts. Any student who, by chance, sits for semester examinations without paying school fees and other charges .shall receive no results.

  • Normal Registration: It shall be mandatory for all students to register for courses at the beginning of each semester of a session in accordance with the rules made from time to time by the University. Normal Registration for courses shall end at an appropriate time/date to be determined by the University. Registration forms must be carefully and correctly filled out. Cancellations, erasures, mutilations, tee pex, etc are not allowed on the fm bearing any of these defects is nullified and therefore Academic advisers should be consulted before filling the
  • Late Registration: Late Registration may be allowed only on payment of a penalty fee which varies from time to time according to the University regulations. The University stipulates the period for late registration.
  • There is no promotion from year to year within the course unit system. If the time table permits, a third year student may, for example, take a lower level course, provided that he/she has the pre-requisites (if any).
  • Students are never asked to repeat an entire year unless their cumulative grade point average is below 1.0. They repeat only those courses which they fail. Students carrying over courses shall not be allowed to register for more that the approved maximum number of units for the Session. Carry-over courses are registered before new ones.
  • Work Load: A student shall normally, in any one academic year, be allowed to register for, and take a minimum of 30 credits and a maximum of 48 credits. Thus, no student can be credited with more than 48 credits at the end of each academic year. Without prejudice to the above, a graduating student may register for only the number of credits he requires to graduate.
  • Lectures for all Repeat courses should be attended in their entirety. Most of the problems encountered by students under the course credit system are caused by students’ failure to attend lectures and do homework in courses which they are repeating. Repeating courses without attending the whole course of lectures and doing all the class assignment have often resulted in repeated failures. Even when the same lecturer is giving a course a second or third time, he will more often than not upgrade his notes to incorporate recent advances in science. This will make things difficult for the student who is relying only on reading of previous notes.
  • Course Evaluation: Students may be examined by a combination of following methods:
  • Term Paper
  • Unannounced quizzes
  • Take-home assignments
  • Mid semester examinations
  • Practicals
  • Semester (end of course) examinations.
  • (a) - (e) above make up the Continuous Assessment which forms part of the end of course grading, provided that it does not count for more than 30%.

IMPORTANT REGULATIONS GOVERNING THE COURSE CREDIT SYSTEM IN THE UNIVERSITY

  • Title of Degree: The Faculty provides a 5-year, 4-year and a 3-year programme leading to the degree of Bachelor of Science (B.Sc.) with Honours in the appropriate subject or degree option.
  • Credits and minimum credit load: Courses shall be evaluated in terms of Credits (or Units). A credit (unit) is a one-hour lecture contact per week, or two or three hour laboratory/practical/tutorial class per week or an equivalent amount of study or any combination of these lasting a semester. Thus a credit (unit) load is equivalent to 15 lecture hours or 30 -45 hours of practical, or tutorials.
  • Course Coding: Courses are coded by the following approved character codes for the various departments. BCH for Applied Biochemistry BIO for Applied Biology AMB for Applied Microbiology and Brewing GLM for Geology and Mining ICH for Industrial Chemistry MAT/STA for Industrial Mathematics, Statistics & Demography PHY for Industrial Physics
  • Course Numbering: A three-digit code is adopted as follows: The first digit denotes the level or year of study. The second digit denotes the subject area (specialist or core area). The third digit denotes the order in which the courses are given provided that: odd numbers represent first semester courses, even numbers represent second semester courses
  • *Details of this are given in the programme of each department, zero (0) represent courses running throughout both first and second semesters. Second and third digits as 99 represent SI WES/IT.
  • Elective courses: These are courses which can be registered only under the advice of the academic adviser as required courses, and must be passed by a student so advised in order to graduate.
  • Core Courses: These are courses that must be offered and passed by all students in any undergraduate programme option of the department,
  • Optional Courses: These are courses which may be taken by a student to make up the minimum credits requirements in a semester. All registered courses must however be passed before graduation.
  • Industrial Training (IT): Industrial training during the second semester of the third year is compulsory for all students in the Faculty. IT is designed to give students an opportunity to put into practice the knowledge which they have acquired in the classroom, in an industry or related establishment. This Industrial work experience is usually supervised by the Faculty. IT is a pre- requisite for graduation and carries 3 credits.
  • Registration of Courses: Courses are registered at the beginning of every session. Failed courses are registered first and higher level courses are then added to make up the approved maximum of 24 credits per semester (if the student is advised to carry full load). Students from other faculties taking service courses in any of the departments in the Faculty MUST register with the relevant departments in the faculty in order to qualify to take the examination. Failure to register means that no record of the student will be in the department/faculty and consequently, no provision will be made for the Indent’s examinations.
  • Degree Requirements: To be eligible for a B.Sc. degree in any department in the Faculty, a candidate must successfully complete the following:
  • University common courses
  • Intra and Inter-faculty courses
  • Departmental core courses
  • SIWES/IT
  • Satisfactory completion of an original research project.

PROJECT REPORT

Undergraduate project report intended for submission to any department in the faculty must be produced according to the prescribed format described below. Project reports that do not conform to the format will be rejected.

  • General information: The original project report should be of high quality, produced with word processor. The text should be written in clear, concise language, devoid of flowery, flowing expressions or newspaper language. It should be typed on one face of the paper only, and double-spaced. Hand-written corrections in the projett repot should, be avoided. Abbreviations used in the text must be explained the first time they occur. Mathematical symbols must be clearly and consistently typed to ensure that the meaning and positions are unambiguous. The Faculty colour for bound project report is dark green. For the viva voce (project defence) the project report should be soft bound. After the necessary corrections following the viva voce, the project report should be hard bound for final submission. Three (3) hardbound copies, including the original copy should be submitted on or before the official date for end of lectures for the second semester. Failure to comply means that the student will join the next batch of students in the second semester of the next academic year. There is no provision for inviting the external examiner twice for students’ Viva voce in one academic year. A student is deemed to have completed his/her project and will be entitled to a grade only after the submission of the hard bound copies.
  • Layout of the project report: The project report shall consist of different sections as follows:
  • Title page
  • Approval page (Certification page)
  • Dedication (if any)
  • Acknowledgement
  • List of tables and figures
  • Table of content
  • Abstract
  • Introduction
  • Literature review
  • Materials and methods
  • Resets and discussions
  • Conclusions
  • References
  • * Can be written under separate headings of (a) Results and (b) Discussions
  • Title page: Tie title page must begin with the title of the project and -the name of the author. This page should also contain a statement that the project report is submitted in partial fulfillment for the award of a Bachelors .Degree in the student’department.
  • Abstract: The project report must begin with an abstract. The abstract should not exceed 300 words, and stating only the highlights of the findings. The abstract which should not be broken into paragraphs should neither contain materials and methods (or any sections of them) nor references.
  • The text: References within the text (Introduction, Literature Review. Results and Discussion) should be cited as follows: (Dale, 1988): (Umeh and Joshi. 1993); (Auwalu et al., 1995).
  • References: Authors cited in the text should be written and arranged in alphabetical order. Where an author has several publications, the earliest is written first while the latest publication is listed last. Several publications by the same author in one year are cited with the letters (a), (b), (;), etc written after the year in question in order of publication. For joint authorship, the names of all the joint authors must be included.
    The examples given below show the style of referencing approved by the Faculty.
    Okonkwo, C.A.C. (1988);. Efficacy of formaldehyde in the control of stem rot disease of cowpeainN.geria. Crop Protection 8:280-282. Okonkwo, C.A.C. (1993), Taro, Colocasia spp. In: Kalloo and Bergh, (eds.) Genetic Improvement of Vegetable Crops. Pergamon Press, Ooxford, pp. 709- 715. Umeh, E.D.N. and Joshi. R. C.(1993). Aspects of the biology, ecology and natural biological control of the African rice gall midge, Orseolia oryzvora Harris and Gagne (Dipt., Cecidomyiidae) in South East Nigeria. J. Appl. Ent 116:391-398. Auwalu, B. M Oseni, T.O., Okonkwo, C.A.C., Tenebe, V. A., Pal, U. R (1995). Influence of some agronomic practices on the growth and yield of Vegetable sesame (Sesamum radiatum). Adv. Hort. Sci. 9:33- 36.
  • Tables and figures: These should be clearly set and placed at the top or bottom of the pages if possible. The text should not be wrapped around tables and figures. Tables are numbered (Roman numerals) in the order in which they are first mentioned. Captions should be placed on top of the table. Figures are also numbered (Arabic numerals) in the order in which they are first mentioned, and captions placed below. Line drawings should be prepared. Author’s sketches are not acceptable. Graphs must be properly labelled with clear explanations e.g. the axes should be labelled and curves demarcated with different symbols. Photographs (if any) shall be good quality glossy prints.

Guidelines for producing the report:

  • All project reports must be produced on standard A4 paper (20cm x26cm).
  • Line spacing: Set at 2. Leave a line space between paragraphs.
  • Italics: Use italics for all scientific/ non-English words.
  • Where this is not available, underline all scientific/non-English words. For example Periplanata americana. et al-
  • ‘Widow/Orphan’ lines: Never start a page with the last line of paragraph or a displayed list; and never finish a page with the first line of a paragraph or a displayed list. Make sure that all the headings are followed on the same page by at least two lines of text.
  • Finally, read over your typed document carefully. You lose a lot of marks by allowing typographical errors (and attributing them to the typist:).

EXAMINATION SCORING AND GRADING k SYSTEM/DEGREE CLASSIFICATION

  • The following examination scoring, grading and degree classification system shown in Table IV is adopted in the Faculty and the University and it is in consonance with the NUC approved guidelines.

Table IV: Scoring, grading and degree classification system.

Credit Hours (CH) Percentage Score Letter Grades Grade Points(GP) Grade Points Average(GPA) Cumulative Grade Point Average (CGPA) Class of Degree
Vary according to contact hours assigned to each course per week per semester and according to student’s workload 70-100
60-69
50 -56
45 -49
40 –44
0 - 39
A
B
C
D
E
F
5.00
4.00
3.00
2-00
1.00
0.00
Derived by the total of the grade points divided by the total Number of credit hours i.e. = GPA P Total Ch 4.50-5.00
3.50-4.49
2.40-3.49
1.50-2.39
1.0 -1.49
00.99
First Class
2nd Class
Upper
2nd Class
Lower
Third Class
Pass Fail
        TotalG    

The degree classification will be based on the Final Cumulative Grade Point Average (FCGPA). FCGPA shall be calculated by dividing the sum of Grade Points for all the courses taken by the total credits of courses taken.

  • Grading of repeated courses: Students earn their full marks in repeated courses. However, in calculating the CGPA, the Grade Points earned in all attempts (including the failed attempts) are used. Below is the Faculty Progressive Result Sheet (usually referred to as the ‘Card’) used to record grades of each student from Year 1 - 4 (or more ), for computation of FCGPA to determine class of degree. Student are advised to use this sheet to work out their CGPA as they progress from year 1 to the final. In this way, it will be clear to the student where he/she is heading to so that, at the end, the student will not say “they gave me...!”

EXAMINATION REGULATIONS

  • General Information
  • Any student who fails to attain at least 70% lecture attendance in a registered course is not entitled to take exams in that course.
  • Students shall be examined on courses taught during the semester.
  • No student shall be absent from any examination for which he/she is due except on account of ill-health certified by a medical practitioner approved by the university, or for some other reason(s) approved by Senate.
  • Course Examination missed for whatever reason, or failed, shall be re-registered in the next earliest opportunity, usually in the relevant semester of the following academic year. There are no re-sit examinations.
  • Examination Conduct
  • At the commencement of university exams, all classrooms and laboratories become out of bounds to all students during the official examination hours of 08.00-17.00 hours except if they are writing officially scheduled examinations.
  • Students shall use their registration numbers and not their names, during university examinations.
  • In common course examinations, students should indicate their departments.
  • No paper, notebook, textbook, etc shall be brought into the examination room by any candidate.
  • Under no circumstances should answer booklets, used or unused, be removed from the examination halls by candidates.
  • Normally no candidate shall be allowed to leave the examination hall within the first 30 minutes from the commencement of the examinations or to enter the hall after the first 30 minutes.
  • No student is allowed to participate in the invigilation of any university examinations.
  • Students are permitted to handle university answer scripts ONLY when writing exams.
EXAMINATION IRREGULARITIES AND SANCTIONS
S/NO OFFENCE SANCTION
1 Creating disturbance in any manner either with the intention to disrupt the peaceful order of the examination or to create confusion in the hall A written warning
2 Disobeying the invigilator during the examination Student fails the examination
3 Holding discussion with another candidate during an examination The guilty student fails the course
4 Cheating by peeping into another’s work during an examination The student fails the course. If there is any evidence of collaboration, the two students fail the course
5 Being in possession of materials relevant to the examination, which offence should be viewed more seriously, with the relevant Department ascertaining the relevance and gravity of the exhibit Suspension for at least one year, depending on the gravity
6 Impersonation Outright expulsion from the University
7 Exchanging Answer scripts during an examination Suspension for one year.
8 Exchange of question papers with answers scribed on them during examination. The two students or all the students involved should fail the examination.
9 Smuggling in already prepared answer scripts into the examination hall. Expulsion from the University.
10 Smuggling out exam question papers with an intent to cheat Suspension for one year.
11 Smuggling out or in of Answer script(s) Suspension for one year.
12 Assault of an invigilator during an exam Expulsion from the University
13 Destruction of evidence(s) material to invigilation Expulsion
14 A student (or students) established to be a culprits) in the leakage of exam papers. Expulsion
15 While first offender(s) will attract relevant punishment(s) as indicated in each case above, second or multiple offender(s) will attract punishment(s) to match the severity of his or their offence(s)  
DEPARTMENT OF APPLIED BIOCHEMISTRY SENIOR STAFF LIST
NAME QUALIFICATION DESIGNATION
A: Academic Staff Ude, C.M. HND (Yaba), PGD (ASUTECH) M.Sc. (NAU). ANIST Senior Lecturer & Ag. Head of Department
Okaka, A.N.C. B.Sc. (Nig) M.Sc. (Lyon) D.Sc (Lyon) Adjunct Professor
Ene, F.U. B.Sc (Nig), M.Sc. (Nig) Adjunct Senior Lecturer
Ikpeazu, O.V.C. Ph.D. (UNICAL), M.Sc. (UNIMEE) B.Sc. (UNMED) Lecturer I
Amadjfe, A.E. B.Sc. (Lond.) HNC, AIMLT M.I. Biol. Lecturer I
Achikanu C.E. B.Sc. (ASJTECH), M.Sc. (NAU) Lecturer II
Okechi, M.U. Ezeh, C.O. B.Sc. (Nig), M.Sc. (Benin) B.Sc. (Nig), M-Sc. (UniPort) Lecturer 11 Asst. Lecturer
Nwodo, C-S. B.Sc. (ASJTECH), M.Sc (Benin) Lecturer II
Ejeagbasi, S. Ugwudike. P.O M.Sc. PGD MIST M.Sc. B.Sc. Lecturer II
Chude, Mary A. M.Sc. B.Sc. Assistant Lecturer
B. Technical Staff Ogbu. S.M AMILT/AMLS, NIM, ISP  
Okoli, K.C. B.Sc. (Nigeria) Technologist II
Aneke, C.J. AMILT Technologist II

INTRODUCTION

Biochemistry is the study of the chemical processes which take place in living organisms. It aims at understanding and unraveling the molecular logic of the living state. It is a relatively young science and has only just emerged as a discipline in its own right. Its study has resulted in explaining many cellular phenomena. The knowledge gained from the study of Biochemistry has led to solution of many problems is the medical/clinical field. Of more recent application is the application of biochemical principles for the production of industrial products of a variety of human use. The study of Biochemical engineering aims at optimizing these manufacturing processes. Of immense relevance is the application of Biochemistry in the fermentation and beverage Qualified graduates of Biochemistry are expected to play an important role in the industrialization of Nigeria.

OBJECTIVES

The programme of the department is made to reflect the ‘Applied’ nature of Biochemistry as taught in a University of Technology: hence. Applied Biochemistry is designed for students whose career will involve the practical application of biochemistry. The students are motivated towards understanding and applying the Biochemical principles they have been taught. Owing to the wide scope of Applied Biochemistry, the programme is designed to give a broad based training covering both classical and technological aspects of biochemistry. This includes courses in Enzymology, Metabolic pathways, Immunochemistry, Plant Biochemistry, Genetic Engineering, Pharmacological Biochemistry Industrial Biochemistry/Biotechnology. Food and Nutritional Biochemistry as well as Biochemical Instrumentation and techniques. In addition, an industrial training experience in a modern industry is as major part of the programme. The graduate of the department are therefore well-at-ease in clinical laboratories, industrial and research establishments and manufacturing industries; thus contributing to the achievement of the national objective for a sound technological take-off.

CODE FOR THE DESIGNATION OF COURSES IN SPECIALIST (CORE) AREAS
‘Number Specialist (Core) Areas
0 Introductory and general biochemistry
1. Enzymology
2. Medical, pharmacological, food and nutritional biochemistry
3. Metabolism, plant biochemistry, microbial Biochemistry, Biosynthesis of macromolecules
4. Analytical biochemistry, physical biochemistry
5. Industrial biochemistry /Biotechnology, Genetic engineering.
6. Special Topics/Seminar in Biochemistry
7. Research Project, Students industrial Work Experience (SIWES)/ IT.

SUMMARY OF COURSE CODES AND TITLES

BCH 102 - Introductory Biochemistry
BCH 201 - General Biochemistry I
BCH 202 - General Biochemistry II
BCH 241 - General Biochemistry Methods (practical)
BCH 222 - Physiological chemistry
BCH 311 - Enzymology
BCH 321 - Pharmacological Biochemistry) I
BCH 323 - Food and Nutritional Biochemistry
BCH 331 - Metabolism of carbohydrates and lipids
BCH 333 - Metabolism of amino acids, proteins and nucleic acids
BCH 335 - Plant Biochemistry
BCH 341 - Bioenergetics
BCH 343 - Methods in Biochemistry
BCH 345 - Membrane Biochemistry 1
BCH 399 - Students Industrial work experience (SIWES)
BCH 412 - Advanced Enzymology
BCH 421 - Tissue Biochemistry
BCH 423 - Immunochemistry
BCH 431 - Biosynthesis of macromolecules
BCH 443 - Advanced Biochemical Instrumentation and technique
BCH 441 - Bioinorganic chemistry
BCH 451 - Industrial Biochemistry/ Biotechnology
BCH 481 - Special topics/Seminar in Biochemistry
BCH 422 - Biochemistry of tropical disease pathogens
BCH 424 - Pharmacological Biochemistry II
BCH 432 - Metabolic regulation
BCH 414 - Microbial Biochemistry
BCH 442 - Membrane Biochemistry
BCH 452 - Molecular Biology/Genetic Engineering
BCH 490 - Research project.

COURSE DISTRIBUTION FOUR YEAR DEGREE PROGRAMME YEAR I (100 LEVEL)

First Semester

S/NO. COURSE CODE COURSE TITLE CREDITS
1 GST 101 Use of English 1 2
2 GST 102 Nigeria Peoples and Culture 2
3 BIO 101 General Biology I 3
4 ICH 101 Chemistry I 3
5 PHY 101 General Physics I 3
6 MAT 101 Mathematics I 3
7 AMB 101 Introductory Microbiology 3
8 CEE 111 Introduction to Computer and Information Technology 3
      22

Second Semester

S/NO. COURSE CODE COURSE TITLE CREDITS
1 GST 106 Social Science 2
2 GST 107 Use of English II 2
3 BIO 102 General Biology II 3
4 ICH 102 Grenistry II 3
5 PHY 102 General Physics II 3
6 MAT 102 Mathematics II 3
7 AMB 102 Introductory Biochemistry 3
8 CEE112 Computer Programming and Language 3
    Total 22

YEAR 2 (200-LEVEL)

First Semester

S/NO. COURSE CODE COURSE TITLE CREDITS
1 BCH 201 General Biochemistry I 3
2 BCH 241 General Biochemistry Methods (Practical) 2
3 ICH 231 General Physical Chemistry 2
4 ICH 221 General Organic Chemistry I 2
5 ICH 211 General Inorganic Chemistry 2
6 STA 201 Statistics for Applied Sciences 3
7 PHY 251 Modern Physics 3
    TOTAL 17
8 MEC211* Engineering Drawing I 3
9 MEC251* Workshop Processes and Practice I 2

First Semester

S/NO. COURSE CODE COURSE TITLE CREDITS
1 BCH 202 General Biochemistry II 3
2 BCH 222 Physiological Chemistry 2
3 ICH 222 General Organic Chemistry 2
4 ICH 212 General Inorganic Chemistry II 2
5 ICH 222 Introductors Genetics 3
6 MAT 202 Ordinary Differential Equation 3
7 GST 202 Man and His Environment 2
    TOTAL 17
8 MEC211* Engineering Drawing II 3
9 MEC251* Workshop Processes and Practical II 2

* Electives.

YEAR 3 (300-LEVEL)

First Semester

S/NO. COURSE CODE COURSE TITLE CREDITS
1 BCH 331 Metablisin of Carbohydrate and Lipids 3
2 BCH 333 Metabolism of Amino acids, Proteins and Nucleic acids 3
3 BCH 335 Plant Biochemistry 2
4 BCH 341 Bioenergetics 2
5 BCH 343 Methods in Biochemistry 3
6 BCH 323 Food and Nutritional Biochemistry 2
7 BCH 321 Pharmacological Biochemistry 1 2
8 BCH 311 Enzymology 3
    TOTAL 21

First Semester

S/NO. COURSE CODE COURSE TITLE CREDITS
1 BCH 399 Students Industrial’Work Experience (S1WES) Students to proceed on six months
(6 months) IT
3

YEAR 4 (400-LEVEL)

First Semester

S/NO. COURSE CODE COURSE TITLE CREDITS
1 BCH 490 Research Project 3
2 BCH 421 Tissue Biochemistry 2
3 BCH 423 Immuno chemistry 2
4 BCH 431 Biosynothesis of Macromolecules 2
5 BCH 441 Bionorganic Chemistry 2
6 BCH 443 Advanced Biochemical methods 2
7 BCH 451 Industrial Biochemistry/Biotechnology 3
8 BCH 481 Special topics/Seminar 2
    TOTAL 18

First Semester

S/NO. COURSE CODE COURSE TITLE CREDITS
1 BCH 490 Research Project 3
2 BCH 412 Advanced Enzymology 2
3 BCH 422 Biochemistry of tropical disease pathogens 3
4 BCH 424 Pharmacological Biochemistry II 2
5 BCH 432 Metabolic Regulation 2
6 BCH 434 Microbial Biochemistry 2
7 BCH 442 Membrane Biochemistry 2
8 BCH 452 Molecular Biology/Genetic Engineering 2
    TOTAL 18

DEPARTMENT OF APPLIED BIOLOGY AND BIOTECHNOLOGY SENIOR ACADEMIC AND TECHNICAL STAFF LIST

NAME QUALIFICATION DESIGNATION
C.S. Eze B.Sc., M.Sc., Ph.D. (Nig) Senior Lecturer & HOD
E-D.N. Umeh B.Sc. (Ibadan) Ph.D.(Canlab), F.R.E.S. (London) Professor
C.A.C. Okonkwo B.Sc.(Nig), M.Sc.. Ph.D. (Kansas, U.S.A.) Professor
J.N.C. Maduewesi B.Sc. (Michigan State), M.Sc., Ph.D. (Wisconsin), FNSPP. Hon. FNIST Adjunct Professor
J.C. Okafor B.Sc. (Aberdeen), PGD Forestry (Oxford). Ph.D. (Ibadan). F.L.S., F.F.A.N Adjunct Professor
G.I. Ameh B.Sc., PGDE, M.Sc., Ph.D(Nig.) Senior Lecturer
J.E. Amadi B.Sc. (Nig.), M.Sc., Ph.D.(Ibadan) Senior Lecturer
H.O. Nwamba B.Sc., M.Sc. (Jos) Lecturer I
F.U. Omeje B.Sc. (Nig.) M.Sc. (ESUT) Lecturer II
K.O. Sowunmi B.Sc. M.Sc. (Ibadan) Lecturer II
C.E. Ugwoke B.Sc..M. Sc. Ph.D. (Nig) Lecturer I, Ag HOD
Ozor I. B.Sc. (Nig.) M.Sc., Ph.D Part-Time Lecturer
Njom V. B.Sc. (ESUT); M.Sc.(UNIZIK) Part-Time Lecturer
Ogbodo I.I. OND; HOD. ANIST. ITC Asst. Chief Technologist
Ugwoke M.S B.Sc. (UNIZIK) SeniorTechnologist

INTRODUCTION

Biology is the scientific study of living organisms. Biological knowledge is required in fields as diverse as Agriculture. Medicine, Town Planning, Environmental Science, Pharmacy. Space Travel. Politics, Philosophy, etc. There is hardly any area of Human endeavour which does not benefit from a biological view point.

Objectives of the Undergraduate Pro gram

The degree program in applied biology and biotechnology is intended for students whose career will be concerned with the practical application of biology with a technological bias. Applied Biology and Biotechnology has recently assumed worldwide cognizance when it was realized that it is the key to most of man’s problems. Its basic importance to social’studies and its contributions to the formulation of a philosophy of life are relevant to disease and pest control; population (human, animal plant) dynamics; food production and supply; biotechnology; environmental pollution and other scourges of the human society. Because of the broad scope implied by Applied Biology, the program is designed to give a broad based training embracing both classical, albeit fundamental biological science courses and their technological (applied) aspects. This covers subjects in physiology, aquaculture, anatomy, ecology, genetics, public health, pest and disease management. parasite logy, taxonomy and aspects of behavioral science cast against a technological background.

There is a wide range of interest areas in biology which enables persons with different backgrounds, aptitudes and temperaments to select satisfactory biological science-based careers e.g. genetic and biophysics for the mathematically inclined: taxonomy and ecology for those with a flair for outdoor activity; morphology, anatomy and cytology for those oriented towards microscopy; chemical taxonomy for the chemically disposed; micro-organisms pest and disease management for those interested in crop and animal production. These specializations come at postgraduate level, but first a fundamental knowledge of plants and animal is required. Apart from teaching and research in basic and applied areas, avenues are open in industries, where they serve as administrators in management positions. In Nigeria, opportunities for service at appropriate levels exist in the commodity research institute such as the Nigerian Institute for Oil’Palm Research, (NIFOR), near Benin, the Rubber Research Institute of Nigeria (RRIN) in lyanomo near Benin; the Tropical Stored Products Institute in Lagos; National Root Crops Research Institute at Umudike; the Veterinary Research Institute at Vom, near Jos; the National Cereals Research Institute in Badeggi near Bida; Cocoa Research Institute of Nigeria (CRIN) near Ibadan; the International Institute for Tropical Agriculture (IITA) at Ibadan; the National Horticultural Research Institute, the Forestry Research Institute and the National Seed Services Organization, all in Ibadan; the various Federal and State Ministries of Agriculture, Forestry and Fisheries, the river Basin Authorities, the Marine and Oceanography Institute in Lagos; and the Federal Environmental Protection Agency (FEPA). Other possible employers of Applied Biology graduates are Federal Quarantine Service, Geological Survey, Oil Exploration Department of NNPC, Germplasm Collection Centers and Harbaria. Museums and Archaeology Institutes, Botanical and Zoological Gardens, parks and Reserves and in various secondary and tertiary institutions.

In the private sector our graduates will find positions in pesticide industries, large farms, agro-based industries and diagnostic laboratories. In the more advanced countries there are many more openings in industries such as pharmaceutical, petrochemical and lumber industries such as fermentation outfits (including breweries); seed companies, food and canning industries and biological supply houses.

Furthermore, prospects for self employment for biologists are quite bright. The areas include floriculture business, mushroom production, fish farming and consultancy services to ministries and various bodies utilizing biological product such as paper mills.

Code for the Designation of Course in Specialist (Core) Areas Number S peeialist (Core) Areas

  • General (introductory, non specialist) Courses
  • Entomology. Mycology, parasitology and pathology
  • Biosystematics & Taxonomy. Cytology, Genetics & Evolution, and Anatomy
  • Biochemistry & Physiology, Molecular Biology
  • Aquatic Biology, Hydrobiology & Fisheries
  • Biogeography, Conservation. Ecology, Environmental Biology
  • Biotechnology
  • Special Topics
  • Seminar
  • Research Proj ects & SI WES

SUMMARY OF COURSE CODES FOR APPLIED BIOLOGY

S/No Course Code Course Title
1. BIG 101 General Biology I
2. BIG 102 General Biology II
3. BIG 112 Medical Parasitology
4. BIG 121 Medical Genetics
5. BIG 201 Cell Biology
6. BIG 203 Invertebrate Zoology
7. BIG 205 Lower Plant Groups
8. BIG 261 Introductory Biotechnology
9. BIG 202 Vertebrate Zoology
10. BIG 221 Plant Anatomy
11. BIG 204 Higher Plant
12. BIG212 Basic Entomology & Parasitology
13. BIG214 Mycology
14. BIG 222 Introductory Genetics
15. BIG 242 Fisheries and Aquiculture
16. BIG 252 General Ecology
17. BIG 251 Population Ecology
18. BIG331 Whole plantPhysiology
19. BIG 332 Genetics
20. BIG311 Histology
21. BIG321 Plant Taxonomy
22. BIG 361 Cell & Tissue Culture Techniques
23. BIG 363 Aspects of Indigenous Biotechnology
24. BIG313 Parastology
25. BI0315 Insect Biology, Physiology and Systematic
26. BIO 335 Animal Physiology and Behaviour
27. BIO 399 Students Industrial Work Experience (SIWES)
28. BIO 421 Molecular Biology and Genetic Engineering
29. BIO 411 Plant pathology
30. BIO 431 Metabolic plant Physiology
31. BIO 413 Economic Entomology
32. BIO 451 Environmental Biology
33. BIO 471 Economic Biology
34. BIO 481 Seminar
35. BIO 452 Bioconservation and management of Natural Resources
36. BIO 422 Comparative Vertebrate Anatomy and Embryology
37. BIO 432 Physiology of plant Growth and Development
38. BI0 412 Public Health Parasitology
39. BIO 414 Applied Entomology
40. BIO 416 Plant Virology
41. BIO 490 Research Project

FACULTY OF APPLIED NATURAL SCIENCES DEPARTMENT OF APPLIED MICROBIOLOGY AND BREWING

DEPARTMENTAL STAFF LIST
NAME DESTINATION QUALIFICATIONS
Mr. L.O. Eneie Senior lecturer NCE, B.Sc., M.Sc (ASUTECH)
Professor N. Okafor Professor BSc., (Lond.), Ph.D (Cantab), FLS FI Diol
Professor C.A. Oyeka Professor BSc, M.Sc, Ph.D (UNN), Medical Microbiology
Professor C.C Onochie Professor B.Sc., M.Sc, Ph.D
Dr. M.A.N. Anikwe Senior Lecturer BSc., M.Sc.
Dr. E.G. Ogu (Sir) Senior Lecturer B.S;., MSc, (Ng), Ph.D (Unizik)
Rev. J.I. Nwankwo Senior Lecturer BSc., M.Sc, (A.SUTECH)
Mrs. S.U. Anozie Lecturer l F.I MLS. M.Phil (UST/PH) BSc.,
Mrs. P.O. Tasie Lecturer 1 M.Sc, (Alabase), Ph.D (Unizik)
Mrs. U.O. George-Okafor Asst. Lecturer B.Sc. (Ife) M.Sc. (ASUTECH) Ph.D (Unizik)
Mr. V.O. Aniaku Chief Technologist B.Sc. (ASUTECH)
Mr. O. Onu Senior Technologist BSc. (INN) Cat. in Brew (Uyo)
Mr. Kenneth Eden Technologist II Ph. D. (Brewing Sc. & Tech UNN) B.Sc. (ESUT)
Ms. M.W. Anyadibe Principal Ex. Officer B.Sc (ESUT)
Mrs. A.S Okonkwo Technologist II B.Sc (ESUT)
Mrs. I.E Adanna Executive Officer F.S.L.C., S.S.C.E.
Mrs. Priscilia Agu Mr. Remigius I. Ugwu Head Lab Attendant WA.E.C, B.Sc
Mrs. Philomena Ezi Head Office Attendant F.S.L.C.

INTRODUCTION

Microbiology is the study of living organisms, which can only be seen with the aid of microscope. Brewing Science and Technology is the study of the art of making beer from malt, hoops, yeast etc. The department offers Applied Microbiology ant Brewing options. In Applied Microbiology, we study the activities of microorganisms in relation to their practical applications in medicine, molecular biology, biotechnology, agriculture, food and industry. In Brewing Science and Technology, we study the chemistry and biochemistry of brewing, fermentation technology, malting, process control, and enzyme technology, etc.

Employment Opportunities

Trained microbiologists serve on the staff of Federal, State and Local government Health departments to improve sanitation and prevent the spread of diseases. They aid in research, diagnosis and therapy in hospitals, pharmaceutical companies and medical research laboratories. They contribute materially to the quality of the products supplied by the food, beverage, textile and leather-tanning industries. Microbiologists also work in fermentation, biotechnology industries as well as in oil companies. Brewing scientists find employment in the breweries, beverage, malting and other fermentation industries: they can also work in food processing industries.

DEGREE OPTIONS

The department offers degrees in Applied Microbiology including medical and industrial as one option; and Brewing Science and Technology as a second option.

CODE FOR DESIGNATION OF COURSE IN SPECIALIST (CORE) AREAS

Number (Middle Digit) Specialist (Core) Areas
0 General and Introductory courses;
1 Medical Microbiology
2 Industrial Microbiology
3 Brewing Science
4 Special Topics
5 Seminar
6 Research project and IT
SUMMARY OF COURSE CODES
S/N CODE COURSE TITLE
1 AMB 101 Introductory Microbiology
2 AMB 102 Introductory Brewing Science & Technology
3 AMB 201 General Microbiology 1
4 AMB 211 Medical Parasitory
5 AMB 202 General Microbiology II
6 AMB 203 General Microbiology Lab practicals
7 AMB 232 Technology of Alcoholic and Non-Alocohlic Beverages
8 AMB 234 Principles of Brewing and Science Technology
9 AMB 310 Pathogenic Bacteriology
10 AMB 311 Medical Microbiology 1
11 AMB 321 Industrial Microbiology
12 AMB341 Microbial Genetics & Molecular Biology
13 AMB331 Biochemistry of Brewing
14 AMB323 Food Microbiology I
15 AMB313 Immimology/Immunochemistry
16 AMB333 Brewing Plant Sanitation & Water Supply
17 AMB343 Food Chemistry for the Microbiologist
18 AMB342 Soil Microbiology
19 AMB 346 Environmental Microbiology
20 AMB344 Microbial Physiology & Metabolism
21 AMB 332 Fundamentals of Large Scale Fermentations
22 AMB 3 12 Medical Microbiology II
23 AMB 322 Industrial Microbiology II
24 AMB 324 Food Microbiology II
25 AMB 324 Fermentation Technology
26 AMB 326 Cereals & Adjunct Technology
27 AMB 441 Techniques in Microbial Biotechnology
28 AMB 410 Plant Pathology
29 AMB 411 Diagnostic Microbiology
30 AMB 412 Pathogenic Mycology
31 AMB 430 General Practical Brewing
32 AMB 440 Special Topics on Use of Local Raw Material in Brewing
33 AMB 499 SIWES/IT
34 AMB 599 Research Project
35 AMB 581 Seminar
36 AMB 511 Pharmaceutical Microbiology
37 AMB 521 Analytical Microbiology
38 AMB 533 Technology of Malting
39 AMB 531 Brewing Microbiology
40 AMB 512 Medical Virology
41 AMB 514 Principles of Epidemiology & Public Health
42 AMB 522 Industrial Microbiology III
43 AMB 553 Microbiology Ecology & Control of Pest
44 AMB 524 Petroleum Microbiology
45 AMB 532 Post Fermentation Technique
46 AMB 534 Brewing Contamination & Hygiene
47 AMB 536 Brew House Safety Measure
48 AMB 538 Hops and Wort Treatment
49 AMB 526 Methodology of Beer Quality and Flavour

DEPARTMENT OF INDUSTRIAL MATHEMATICS, STATISTICS AND

DEMOGRAPHY

ACADEMIC STAFF

S/No. NAME QUALIFICATION DESIGNATION
1. Asogwa C.J.U B.Sc. M.Sc. (Nig.) Snr. Lecturer, Ag. HOD
2. Oveka I.C. A B.Sc. Ph.D (USA) Professor
3 Okole F.I. B.Sc.. (Nig). Dip. Adv. Maths. (Oxon) Ph.D.(Soton) Snr. Lecturer
4 Onuoha C.N B.Sc. M.Sc. (Nig.) Snr. Lecturer
5 Okeke A.O. B.Sc. M.Sc. Snr. Lecturer
6 Ugwu A.H. B.Sc. M.Sc. Lecturer I
7 Abugu M.C. B.Sc. M.Sc. Lecturer I
8 Ezeugolie. I.K. B.Sc. M.Sc. Snr. Lecturer
9 Igwenagu M.C. B.Sc. M.Sc. Lecturer II
10 Mbah. G.C.E B.Sc. M.Sc. Ph.D Snr. Lecturer
11 Anyanwu Chika B.Sc. Departmental Secretary

INTRODUCTION

Philosophy

Mathematics may be regarded as the language of science; and the broader objective of science must include the goals of social, economic and political modernization. The classical application of the tools of mathematics was in the field of the physical sciences and engineering. With the advent of Operations research in the second half of the 20th Century, the scope and applicability of mathematical methods have greatly expanded to include the environmental, social and life sciences. The undergraduate programme, which we present here, emphasizes the applications of mathematics and statistics to real life problems. Since any planning at the national level must relate to population distribution, the annual rate of population growth, size of population, labour absorptive capacity of the population, etc, our undergraduate programme for the statistics option lays adequate emphasis on demography and bio-statistics.

Objectives: The general aims of the Department are to enable:

  • all students of the University develop clear logical thinking and expression of thought, using the powerful tools of mathematical and statistical modeling as conveyed through our service courses;
  • all students of the Department acquire facility in the applications of mathematics and statistics to real life problems in government, industry education and research;
  • all students gain sufficient ability in, and know how to teach mathematics and/or statistics in the Nation’s educational institutions at the primary, secondary or tertiary level.

CURRICULUM FOR B. Sc. (HONS) IN MATHEMATICS

STANDARD 4 YEAR PROGRAMME

YEAR 1 (100 LEVEL)

First Semester
S/No. COURSE CODE COURSE TITLES CREDITS
1. GST 101 Use of English I 2
2. GST 102 Nigeria Peoples & Culture 2
3 BIO 101 General Biology I 3
4 ICH 101 Chemistry I 3
5 MAT 101 Mathematics I 3
6 PHY 101 General Physics I 3
7 STA10 Probability I 3
8 CEE 111 Introduction to Computers & Information Technology 2
    Total 21
Second Semester
S/No. COURSE CODE COURSE TITLES CREDITS
1. GST 106 Social Sciences 2
2. GST 107 Use of English II 2
3 BIO 102 General Biology II 3
4 ICH 102 Chemistry II 3
5 MAT 102 Mathematics II 3
6 PHY 102 General Physics II 3
7 MAT 106 Coordinate Geometry and Logic 3
8 SAT 102 Inference I 3
9 CEE 112 Computer Programming & Language 2
    Total 23

YEAR 2 (200 LEVEL)

First Semester
S/No. COURSE CODE COURSE TITLES CREDITS
1. MAT 233 Calculus II 3
2. MAT 201 Introduction to Linear Algebra and the Complex Variable 3
3 PHY 201 Modern Physics 3
4 STA 231 Inference II 3
5 SAT 221 Probability II 3
6 MAT 211 Business Mathematics I 3
    Total 18
Second Semester
S/No. COURSE CODE COURSE TITLES CREDITS
1. MAT 256 Numerical Methods 3
2. MAT 244 Mechanics I 3
3 MAT 202 Introduction to Differential Equations and Complex Variables 3
4 STA 221 Inferences III 3
5 SAT 222 Probability III 3
6 GST 202 Man & His Environment 2
    Total 17

First Semester

YEAR 3 (300 LEVEL)
S/No. COURSE CODE COURSE TITLES CREDITS
1. MAT 351 Introduction to Linear Programming 3
2. MAT 333 Advanced Calculus 3
3 MAT 341 Dynamics 3
4 MAT 3531 Numerical Analysis I 3
5 SAT 321 Real Analysis and Topology 3
6 MAT 3 11 Optimization Theory and Methods 3
7 MAT331 Intermediate Course on Differential Equations 3
    Total 21
  Elective /Optional    
8 MAT 327 Differential Geometry 3
9 MAT 361 Introduction to Tensors 3
10 STA 321 Probability IV 3
11 STA 311 Sampling Theory and Methods I 3
12 STA 333 Analysis of Variance I 3
Second Semester
S/No. COURSE CODE COURSE TITLES CREDITS
1. MAT 3 99 Students Industrial Work Experience (SIWES) 3

First Semester

YEAR 4 (400 LEVEL)
S/No. COURSE CODE COURSE TITLES CREDITS
1. MAT 411 Business Mathematics 2 3
2. MAT 421 Abstract Algebra I 3
3 MAT 433 Functions of a Complex Variable with Applications 3
4 MAT 451 Mathematical Modeling 3
5 MAT 45 3 Operations Research I 3
6 MAT 431 Partial Differential Equations 3
7 MAT 490 Project 3
    Total 21
8 MAT 416* Introduction to Measure Theory 3
9 MAT 417* Quantum Mechanics 3
10 MAT 41 8* Relativistic Mechanics 3
11 MAT 419* Switching Theory 3
12 MAT 428* Continuum Mechanics 3
13 MAT 429* Discrete Mathematical Structures 3
Second Semester
S/No. COURSE CODE COURSE TITLES CREDITS
1. MAT 452 Operations Research II 3
2. MAT 454 Numerical Analysis II 3
3 MAT 422 Introduction to Functional Analysis 3
4 MAT 424 Abstract Algebra II 3
5 MAT 432 Complex Analysis 3
6 MAT 434 Ordinary Differential Equations 3
7 MAT 490 Project 3
    Total 21
8 MAT 426* Lebesgue Integrals 3
9 MAT 427* Control Theory 3
10 MAT 428* Continuum Mechanics II 3
11 MAT 429* Sequential Mechanics 3

* Electives / Optionals

DEPARTMENT OF GEOLOGY & MINING SENIOR STAFF LIST;
NAME QUALIFICATION POSITION
A. Academic Staff P.O. Okeke B.Sc. M.Sc. DIC. Ph.D. (London) Professor & HOD
M.C. Ezepue B.Sc. M.Sc. Ph.D Adjunct Professor
K..E. Nwabufo- Ene B.Sc. M.Sc. Ph.D. (Wales) Adjunct Professor
D.C. Ozoko B.Sc. M.Sc. Ph.D. (Nig.) Senior Lecturer
C.O. Awalla B.Sc. M.Sc. (Nig). PGD. Ph.D. (Nig.) Senior Lecturer
C.C. Eze B.Sc. M.Sc. (Ibadan). Ph.D.(Nig) Senior Lecturer
H.N. Eze B.Sc. M.Sc. (Moscow) Ph.D Senior Lecturer
Mike Dimanyi B.Sc. (ASUTECH). M.Sc. Lecturer II
Alex N. Nwatarali B.Sc. (ASUTECH). M.Sc.(FUTO) Asst. Lecturer
Augustine Okonkwo B.Sc. (ESUT). M.Sc. Assl. Lecturer
ifeoma Mary Ezechukwu B.Sc. (Nig). M.Sc. Ass. Lecturer
B. Non-Academic Staff    
Mr. RE. Okove HND (UK). Asst Chief Technologist
Mr. Ikensa Ezeoji HND. Mining Survey Technologist
MR. Mike Aluma B.Sc. (ESUT). MBA (ESUT) Secretary
Mrs. Josephine Umeh B.Sc. (ESUT) HEO
Mrs. Faith Owoh B.Sc. (ESUT) Assl Executive Officer
Mrs. Martina Onah WAEC Field Lab Assistant

INTRODUCTION

Geology is the science of the earth. It deals with the origin, composition, structure, physical development and biological evolution of the earth and the planetary system.
In the study of the earth, the geologist relies upon other basic science for example, physics, chemistry. Mathematics, zoology, botany etc.

Objectives of the Undergraduate Programme

The department offers a three or four-year B.Sc. honours degree programme in Geology and Mining. After the degree programme in Geology and Mining, graduates will be competent to undertake work as professional geologists, mining geologists or trainee goescientists in industry and government. The graduates may also pursue farther studies leading to advanced degrees in specialized areas of geological sciences.

YEAR 1(100 LEVEL

First Semester
S/No. COURSE CODE COURSE TITLES CREDITS
1. GST 101 Use of English I 2
2. GST 102 Nigeria Peoples & Culture 2
3 MAT 101 General Mathematics I 3
4 PHY 101 Genera! Physics I 3
5 ICH 101 Chemistry I 3
6 BIO 101 General Biology 3
7 GLM 101 Earth Materials 3
8 CEE 111 Introduction to Computer & Information Technology 2
    Total 21
First Semester
S/No. COURSE CODE COURSE TITLES CREDITS
1. GST 106 Social Sciences 2
2. GST 107 Use of English II 2
3 MAT 102 General Mathematics II 3
4 PHY 102 Genera! Physics I1 3
5 ICH 102 Chemistry II 3
6 BIO 102 General Biology II 3
7 GLM 112 Earth Processes and History 3
8 GLM 152 Field Geology 3
9 CEE 112 Computer Programming & Language 2
    Total 24

First Semester

YEAR 2 (200 LEVEL)
S/No. COURSE CODE COURSE TITLES CREDITS
1. MAT 201 Linear Algebra and Complex Variables 3
2. STA 201 Statistics for Applied Sciences 3
3 GLM 251 Structural Geology 3
4 GLM 253 Geological Map Interpretation 3
5 GLM 261 Geology of Nigeria 3
6 MEC 211* Engineering Drawing I 3
    Total 15
Second Semester
S/No. COURSE CODE COURSE TITLES CREDITS
1. MAT 202 Introduction to Differential Equations & Complex Variables 3
2. GLM 212 Introduction to Petrology 2
3 GLM 214 Crystallography and Optical Mineralogy 3
4 GLM 222 Introduction to Palaeontology & Historical Geology 2
5 GLM 224 Principles of Stratigraphy 2
6 GLM 254 Fundamental Surveying 2
7 GLM 202 Man and His Environment 2
8 MEC 212* Engineering Drawing II 3
    Total 16

* Electives

First Semester

YEAR 3 (300 LEVEL)
S/No. COURSE CODE COURSE TITLES CREDITS
1. GLM 311 Igneous and Metamorphic Petrology 3
2. GLM 321 Sedimentology and Basin Analysis 3
3 GLM 323 Introduction to Micro Palaeontology 2
4 GLM 331 Economic Geology 3
5 GLM 341 Introduction to Mining Engineering & Technology 2
6 GLM 343 Principles of Geophysics 2
7 GLM 361 Photogeology and Remote Sensing 3
8 GLM 363 Marine Geology 2
    Total 20
Second Semester
S/No. COURSE CODE COURSE TITLES CREDITS
1. GLM 392 Geological Mapping 3
2. GLM 399 SIWES/IT 3
    Total 6

First Semester

YEAR 4 (400 LEVEL)
S/No. COURSE CODE COURSE TITLES CREDITS
1. GLM 431 Mining Geology 2
2. GLM 443 Hydrogeology 3
3 GLM 445 Geochemistry 3
4 GLM 447 Engineering Geology 3
5 GLM 451 Exploration Drilling 2
6 GLM 453 Mine Survey 2
7 GLM 481 Seminar and Special Paper 2
8 GLM 441* Tectonophysics 2
9 GLM 490 Project 3
    Total 20

* Elective

Second Semester
S/No. COURSE CODE COURSE TITLES CREDITS
1. GLM 422 Petroleum Geology & Other Energy Sources 3
2. GLM 432 Mine Management and Mineral Economics 3
3 GLM 442 Applied Geophysics 3
4 GLM 462 Environmental Geology 2
5 GEM 452 Applied Structural Geology 3
6 GLM 490 Project 3
    Total 17

DEPARTMENT OF INDUSTRIAL CHEMISTRY

SENIOR STAFF LIST
NAME QUALIFICATION POSITION
A. Academic Staff Attah J.C. B.Sc.; (Benin). M.Sc: (Nig) Lecturer I
Amujiogu S.N B.sc. (Germany) M.Sc. (Southeastern Mass) Ph.D. (Clemson) Professor
Nduji A.A. B.Sc. (Nig), M.Sc. Ph.D (Zaria) Reader
Oguakwa. J.U. B.Sc..(Hon) (London) Ph.D (Moscow State) Adjunct Professor
Ekere N.R. B.Ed. M.Sc. Ph.D (FUTO) Senior Lecturer
Nwigwe I.R. B.Sc/M. Phil. (Ibadan) Senior Lecturer Ag. Head of Department
Aneke I.B B.Sc.: (Benin. M.Sc. (Nig) Lecturer I
Chime C.C. B. Sc.; (Nig) M.Sc. (Zaria) Asst. Lecturer
Nwagu L.N B.Sc. (Florida) M.Sc. (Atlanta) Asst Lecturer
B. Technical Staff Oebuanu C.C. B.Sc. (Unizik) PGD (ESUT) Principal Technologist
Okanya L.O N.D. HND Asst. Chief Technologist
Ogbodo P.I OND. HND Principal Technologist

INTRODUCTION

Chemistry deals with the nature of substances and the generation of entirely new materials by their mutual reaction. Industrial Chemistry as a subject therefore comes in very useful as an application of chemical knowledge to a range of industrial endeavours.

The pharmaceutical petrochemical, soap and detergents, paints, dyes and textiles; insecticides, food and biochemical industries are just some of the endeavours where industrial chemistry is applied. A proper training of students t equip them with sound knowledge of chemical principles and Laboratory practice will make it possible for them to help solve problems in such industries.

By being able to design alternate and cheaper routes to production, discover the use of alternative and more readily available raw materials, the trained chemist is equipped to serve as a catalyst for the creation of national wealth for the wellbeing of the general public. Nigeria is a developing country and her budding chemical industries need many such industrial chemists

Objectives of the Department

The undergraduate programme in chemistry is designed’ to cater both for the academic type student, and for those students whose employment will require an application of their knowledge of both chemical principles and chemical laboratory practice.

The theoretical aspects of the course ensure a strong grounding in the different areas of chemistry. In addition students are exposed to some aspects of mathematics, physics, biology, Engineering, Computer Science and Humanities. This ensures a well balanced programme which is intended to produce truly educated graduates, knowledgeable in many fields giving them the ability for sound decision making even in complex situations.

Since the University aims at being)” relevant to the needs of the society” the programme is organized such that her graduates would be equipped not only to work in already established industries but also be able to set cup their own industries which can utilize chemical processes and which can grow to employ others.

Summary of Course Codes and Titles

Core for Designation of Courses in Specialist (Core) Areas
Number Specialist (Core) Areas
0; For general or introductory non-specialist course
1 Inorganic Chemistry
2 Organic Chemistry
3 Physical Chemistry and Radio-Nuclear Chemistry
4 Analytical Chemistry
5 Polymer Sciences and Raw Materials
6 Industrial Processes and Raw Materials
7  
8 Seminar
9 Research Project and IT

Summary of Course Codes and Titles

S/No COURSE CORE COURSE TITLE
1 ICH 101 General Chemistry I
2 ICH 103 Practical Chemistry I
3 ICH 102 General Chemistry II
4 ICH 104 Practical Chemistry II
5 ICH 221 Organic Chemistry II
6 ICH 211 Inorganic Chemistry II
7 ICH 213 Practical Inorganic Chemistry
8 ICH 231 Physical Chemistry II
9 ICH 241 Analytical Chemistry I
10 ICH 224 Practical Organic Chemistry
11 ICH 232 Structure and bonding
12 ICH 233 Practical Physical Chemistry
13 ICH 234 Applied Surface and Colloidal Chemistry
14 ICH 262 Quality control and Industrial Safety standards
15 ICH 242 Applied Spectroscopy
16 ICH 261 Resources of Industry
17 ICH 226 Petrochemistry
18 ICH 331 Physical Chemistry III
19 ICH 311 Inorganic Chemistry III
20 ICH 321 Organic Chemistry III
21 ICH 322 Carbohydrate Chemistry
22 ICH 312 Non Aqueous Systems.
23 ICH 353 Fibre Processing
24 ICH 333 Chemical Physics
25 ICH 328 Group theory and symmetry
26 ICH3321 Atomic and Molecular Structure and symmetry
27 ICH 3431 Instrumental Methods of Analysis
28 ICH 351 Polymer Chemistry and Technology I
29 1CH 364 Industrial Chemistry Processes I
30 ICH 421 Natural Products Chemistry
31 ICH 411 Organometallic Chemistry
32 ICH 431 Electrochemistry
33 ICH 432 Quantum Chemistry
34 ICH 441 Spectroscopy
35 ICH433 Radio-Nuclear Chemistry
36 ICH461 Industrial Chemistry Processes II
37 ICH481 Seminar
38 ICH453 Colour Chemistry, and Technology
39 ICH 490 Research Project
40 ICH438 Statistical Thermodynamics
41 ICH435 Statistical Mechanics
42 ICH427 Physical Organic Chemistry
43 ICH425 Mechanisms of Electron Transfer
44 ICH422 Synthetic Organic Chemistry
45 ICH412 Co-ordination Chemistry
46 ICH432 Chemical Kinetics
47 ICH424 Heterocyclic Chemistry
48 ICH452 Polymer Chemistry and Technology II
49 ICH442 Analytical Chemistry II
50 ICH436 Applied catalysis
51 ICH414 Chemistry of Lanthanides and Actinides
52 ICH426 Photochemistry and Pericyclic Reactions
53 ICH399 SIWES/IT

DEPARTMENT OF INDUSTRIAL PHYSICS

ACADEMIC STAFF LIST

NAME QUALIFICATION POSITION
A.I. Onyia B.Sc,M.Sc. (Nig) Senior Lecturer and Ag. HOD
Gabriel Anene B.Sc. M.Sc. Ph.D Professor
A.E. Eze B.Sc. M.Sc. Ph.D Professor
P.C. Ozoemena B.Sc. M.Sc. Ph.D Professor
A.C Ugwoke B.Sc. M.Sc. Ph.D.(Nig) Senior Lecturer
P.C. Ezema B.Sc. M. Phil.; PhD. (Nig) Senior Lecturer
G.Z. Ugwu B.Sc. M.Sc.(Nig) Senior Lecturer
A.E. Umahi B.Sc. M.Sc.(Nig) Senior Lecturer
J. Eke B.Sc. M.Sc. Ph.D Senior Lecturer
C.N. Chigbo B.Sc. M.Sc.(Nig) Lecturer I.
TECHNICAL STAFF NAME QUALIFICATION POSITION
M.C Ochiagha City & Guild AISTDip HND Chief Teclnologist
Adama Mathias B.Sc. Principal Teclnologist
Odo Matthew WASC Snr Lab. Assistant
Njoku Jonathan GCE Snr Lab. Supervisor

PHILOSOPHY AND MAJOR AIMS AND OBJECTIVES OF THE PROGRAMME

The programme of the Department of Industrial Physics is designed to:

  • Provide the student with an understanding of tie principles governing the behaviour of the physical universe, and
  • Develop in the student an appreciation of the scientific method and its application to the technological problems of today. Thus the department aims at developing the human resource into a form that can be of service to the public and to satisfy the needs aid aspirations of the society from which the students are drawn. In this regard the degree programme of the Industrial Physics Department must be applied in nature and resultoriented. The emphasis is therefore, on appropriate technology in the context of a university education.

However, the applied nature of the programme must not be overstretched at the expense of established requirements in the education of a physics. To this end we identify two directions which the degree structure aims at achieving viz

  • The vertical direction which emphasizes the global motivation and a sound physics background linking the student with the outside world of high technology. This will take the students through the classical, statistical quantum mechanical to the atomic and subatomic (nuclear) world and the universe; and
  • The horizontal direction emphasizing the local motivation and applied nature of the programme. Students are here encouraged to work practically with local materials paying attention to instrumentation, solid state devices and spreading out to telecommunication application and energy related problems of our environment.

FOUR YEAR ACADEMIC PROGRAMME

YEAR 1 (100 LEVEL)

Second Semester
S/No. COURSE CODE COURSE TITLES CREDITS
1. GST 101 Use of English I 2
2. MATH 101 Mathematics I 3
3 PHY 101 General Physics I 3
4 ICH 101 Chemistry I 3
5 BIO 101 General Biology I 3
6 GST 102 Nigeria Peoples & Culture 2
7 CEE 111 Introduction to Computers and Information Technology 2
8 LBS 101 Introduction to Library Studies 1
    Total 19
Second Semester
S/No. COURSE CODE COURSE TITLES CREDITS
1. GST 107 Use of English II 2
2. MAT 102 Mathematics II 3
3 PHY 102 General Physics II 3
4 ICH 102 General Chemistry II 3
5 BIO 102 General Biology II 3
6 GST 106 Social Sciences 2
7 PHY 107 Experimental Physics 3
8 CEE 112 Computer Programming and Languages 2
    Total Credits 21

YEAR 2 (200 LEVEL)

First Semester
S/No. COURSE CODE COURSE TITLES CREDITS
1. MAT 201 Linear Algebra & Complex Variables 3
2. STA 201 Statistics for Applied Sciences 3
3 PHY 251 Modern Physics 3
4 PHY 221 Physics of the earth and atmosphere 2
5 PHY 241 Optics and waves 3
6 PHY 271 Quality control techniques 2
7 PHY 223 Introduction to astrophysics 3
8 LBS 102 Introduction to Library Studies II 1
    Total Credits 19
9 LBS 102 Engineering Drawing I 3
10 MECH 251* Workshop Practice I 2
Second Semester
S/No. COURSE CODE COURSE TITLES CREDITS
1. MAT 202 Introduction to differential equation & Complex Variables 3
2. PHY 242 Electric circuits and electronic 2
3 GST 202 Man and His environment 2
4 PHY 252 Classical physics, mechanics and relativity 2
5 PHY 234 Solar energy I (fundamental process) 2
6 PHY 222 Applied geophysics 3
7 PHY 232 Thermal physics I 2
8 PHY 207 Instrumentation and Devices I (practical) 3
    Total Credits 19
9 MECH 212* Engineering Drawing II 3
10 MECH 252* Workshop Processes and Practice II 2

* Electives

First Semester

YEAR 3 (300 LEVEL)
S/No. COURSE CODE COURSE TITLES CREDITS
1. PHY 351 Quantum Physics I 3
2. PHY 341 Electromagnetism I 2
3 PHY 311 Solid State Physics I 2
4 PHY 361 Nuclear Physics and Technology I 3
5 PHY 345 X-ray Physics and Technology 2
6 PHY 343 Electronics I 2
7 PHY 347 Infra-red Physics and Technology 3
8 PHY 371 Mathematical Methods in Physics 3
    Total 21
Second Semester
S/No. COURSE CODE COURSE TITLES CREDITS
1. PHY 399 SIWES/IT 3
    Total 3

First Semester

YEAR 4 (400 LEVEL)
S/No. COURSE CODE COURSE TITLES CREDITS
1. PHY 490 Project 3
2. PHY 451 Quantum Physics II 3
3 PHY 441 Electromagnetism II 2
4 PHY 461 Nuclear Physics and Technology II 2
5 PHY 411 Solid State Physics II 3
6 PHY 443 Electronics II 2
7 PHY 445 Laser Physics and Technology 2
8 PHY 481 Seminar 2
    Total 19
Second Semester
S/No. COURSE CODE COURSE TITLES CREDITS
1. PHY 490 Project 3
2. PHY 432 Thermal Physics II 3
3 PHY 462 Atomic Physic and Spectroscopy 3
4 PHY 422 Applied Geophysics II 3
5 PHY 434 Solar Energy II (Application and Alternative Energy sources) 2
6 PHY 442 Microwave Physics and Technology 2
7 PHY 407 Instrumentation and Devices II 3
    Total 19